I have a Leadtek DTV 1000 S tv card. While it does work out of the box with e.g. me-tv, there's a fair bit of annoying stuff happening, such as failure to lock channels a couple of times per evening.
The first step is to put the following your /etc/modules:
If you check dmesg after boot you'll, however, notice the following as well:
If you unload and reload your saa7134 and saa7134_dvb modules and the firmware should load. At the very least it will on the next boot:
The first step is to put the following your /etc/modules:
options saa7134 tuner=48 card=175
If you check dmesg after boot you'll, however, notice the following as well:
and this is how you fix that:
[ 8.729961] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...
[ 8.775721] tda10048_firmware_upload: Upload failed. (file not found?)
mkdir ~/tmp/tda10048 -p
cd ~/tmp/tda10048
wget http://steventoth.net/linux/hvr1700/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip
unzip HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip
dd if=Driver85/hcw85bda.sys of=dvb-fe-tda10048-1.0.fw bs=1 skip=667744 count=24878
sudo cp dvb-fe-tda10048-1.0.fw /lib/firmware/
If you unload and reload your saa7134 and saa7134_dvb modules and the firmware should load. At the very least it will on the next boot:
[ 8.929850] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...
[ 8.967595] tda10048_firmware_upload: firmware read 24878 bytes.
[ 8.967604] tda10048_firmware_upload: firmware uploading
This is dummy text. It is not meant to be read. Accordingly, it is difficult to figure out when to end it. But then, this is dummy text. It is not meant to be read. Period.
ConversionConversion EmoticonEmoticon