17. Linphone with iinet iitalk voip service on Debian Testing 64 (Wheezy)

We've got the Naked DSL from iinet, and included with it is a 'free' voip service, iitalk. Since we haven't got either a modem supporting voip, or an ATA adapter + regular terrestrial phone, we're aiming for the next best - using a software voip solution on our desktop. Linphone is FOSS and available in the debian repos.

You will have received an email from iinet with the following details:
Your Netphone number:         0xxxxxxx
Your Netphone password:     yyyyyyy
Your Netphone PIN:                 zzzz
VoIP SIP domain:            iinetphone.iinet.net.au
VoIP SIP server:              sip.state.iinet.net.au

where state is act, nsw, vic, wa etc. giving something along the lines of sip.act.iinet.net.au


first
sudo apt-get install linphone

You'll find the GUI version on your gnome menu under 'internet'. Start it.
Go to Linphone/Settings
Click on the manage SIP accounts tab.
There are three main sections on this tab: default identity, Proxy accounts and Privacy
Don't bother with the Default identity or Privacy; instead click on Add under Proxy accounts


Your SIP identity: sip: 0xxxxxxx@sip.state.iinet.net.au
SIP proxy addres: sip: sip.state.iinet.net.au
Route (optional): sip:
Registration duration (sec): 3600
Register at startup: yes

You can also set up the account directly in your ~/.linphonerc :

[proxy_0]
reg_proxy=sip:sip.state.iinet.net.au
reg_route=sip:
reg_identity=sip:0xxxxxxx@sip.state.iinet.net.au
reg_expires=3600
reg_sendregister=1
publish=0
dial_escape_plus=0

[auth_info_0]
username=0xxxx
userid=0xxxxxx
passwd=yyyyyyyyyyy
realm="iinetphone.iinet.net.au"

The number after proxy_ and auth_info_ depends on whether you have other accounts defined as well. Note that the .linphonerc file will contain a fair number of other things. Here's my full .linphonerc (with some information replaced by x's)


[sound]
playback_dev_id=ALSA: default device
ringer_dev_id=ALSA: default device
capture_dev_id=ALSA: default device
remote_ring=/usr/share/sounds/linphone/ringback.wav

[video]
device=V4L2: /dev/video0
size=cif
enabled=0
display=0
capture=0
show_local=0
self_view=1

[GtkUi]
advanced_ui=1
uri0=0xxxxxxxx

[net]
download_bw=0
upload_bw=0
firewall_policy=0
mtu=0

[sip]
sip_port=5060
guess_hostname=1
contact=<sip:xxx@192.168.1.2>
inc_timeout=15
use_info=0
use_rfc2833=0
use_ipv6=0
register_only_when_network_is_up=1
default_proxy=0

[auth_info_0]
username=0xxxxxxx
userid=0xxxxxxxx
passwd=yyyyyyy
realm="iinetphone.iinet.net.au"

[rtp]
audio_rtp_port=7078
video_rtp_port=9078
audio_jitt_comp=60
video_jitt_comp=0
nortp_timeout=30

[audio_codec_0]
mime=speex
rate=32000
enabled=1

[audio_codec_1]
mime=speex
rate=16000
enabled=1

[audio_codec_2]
mime=speex
rate=8000
enabled=1

[audio_codec_3]
mime=GSM
rate=8000
enabled=1

[audio_codec_4]
mime=PCMU
rate=8000
enabled=1

[audio_codec_5]
mime=PCMA
rate=8000
enabled=1

[video_codec_0]
mime=MP4V-ES
rate=90000
enabled=1
recv_fmtp=profile-level-id=3

[video_codec_1]
mime=theora
rate=90000
enabled=1

[video_codec_2]
mime=H263-1998
rate=90000
enabled=1
recv_fmtp=CIF=1;QCIF=1

[video_codec_3]
mime=H263
rate=90000
enabled=1

[video_codec_4]
mime=x-snow
rate=90000
enabled=1

[proxy_0]
reg_proxy=sip:sip.state.iinet.net.au
reg_route=sip:
reg_identity=sip:0xxxxxxxxx@sip.state.iinet.net.au
reg_expires=3600
reg_sendregister=1
publish=0
dial_escape_plus=0

• Tweet
• Share
• Share
• Share
• Share

About Admin MC3

This is dummy text. It is not meant to be read. Accordingly, it is difficult to figure out when to end it. But then, this is dummy text. It is not meant to be read. Period.

Related Post